-
IOS Recommendation and Download for Catalyst 9K Platforms
IOS Recommendation : https://www.cisco.com/c/en/us/support/docs/switches/catalyst-9300-series-switches/214814-recommended-releases-for-catalyst-9200-9.html Software Download : https://software.cisco.com/download/home
1:43
-
Upgrading Catalyst 9600 Quad-Supervisor StackWise Virtual Setup with ISSU
ISSU compatibility matrix can be found here : https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst_standalones/b-in-service-software-upgrade-issu.html
7:07
-
Upgrading a Stack of Catalyst 9200 Switches in Install Mode
This video provides the method to upgrade a Catalyst 9200 Stack in Install Mode. Tags: catalyst,upgrade,switch,install,stack
5:53
-
How to configure High Speed Stacking on Cisco Catalyst 9300X Series Switches
The purpose of this video is to provide the necessary knowledge to configure High-Speed Stacking on Cisco Catalyst 9300 Series Switches. Tags:configuration,stack,IOS-XE
3:42
-
Collecting Logs and Debug Bundle on Catalyst 9800 Wireless Controller
This video shows how to generate the most frequently asked logs (RA traces and packet captures) in the troubleshooting process as well as debug bundle creation that ensures the information is complete.
5:06
-
Recovering C9000 Switches from a Rommon Boot Loop
The purpose of this video is to provide the necessary knowledge to Perform a Rommon Recovery on C9000. switches, the process will allow you to recover the switch when facing a booting loop scenario. Tags: recovery,rommon,configassitance,Catalyst9000
4:22
-
AutoQoS Configuration on Catalyst 9000 Switches
In this video we demonstrate how to configure AutoQoS on Catalyst 9000 Switches. Tags: AutoQoS,Catalyst 9000,Configuration Assistance
3:04
-
Configure REP VLAN Load Balancing
Contributed by: Fernando De Aquino This video/document describes the steps to configure REP VLAN load balancing on Cat 9K Switches (9300, 9500). Tags: Troubleshooting, Configuration Guide, 9300 Switch, 9500 Switch,
5:53
-
Replace a DIMM Module on Cat9600 Supervisor Engine 1
This video provides the method on how to replace the DIMM memory module on a Cat9600 Supervisor Engine 1. Tags:cat9k,c9k,sup1,c9600,c9600-sup1
2:50
-
Upgrade Cat9K with ISSU
This video provides the steps to upgrade the 9K Switches (9400,9500 and 9600) with ISSU.
5:10
-
Configure and Verify a REP Ring Segment
Contributed by: Fernando De Aquino This video/document describes the steps to configure and verify a REP Ring Segment on Cat 9K Switches (9300, 9500). Tags: Troubleshooting, Configuration Guide, 9300 Switch, 9500 Switch, REP
5:21
-
LAN Switching - C9300/C9200 - Convert from Install Mode to Bundle Mode
Contributed by: Erendira Ortiz, Daniela Perez, Luis Gil This document describes in video format the steps to: Convert from Install mode to Bundle Mode for Catalyst 9300 and 9200 switches. Tags: switch,cat9300,cat9200,install,bundle,mode
5:24
- Load More