Configure Wi-Fi 6E on 9800 Wireless LAN Controller
4:54
This video demonstrates steps to configure C9800 WLC to enable Wi-Fi 6/6E on supported access points.
Related Videos
In Technical Assistance Center (TAC)
-
Play video Configure vPC on Cisco Nexus Switches
Configure vPC on Cisco Nexus Switches
Hello dear experts. This video describes how to configure a vPC domain between 2 Cisco Nexus devices and how to configure a Virtual Port Channel to a third device downstream. Tags: nexus,9000,7000,5000,3000,vPC,configuration
7:17
-
Play video Upgrade Software Images on cEdges via CLI
Upgrade Software Images on cEdges via CLI
Upgrading SDWAN IOS-XE Software images on cEdges via the CLI. Tags: SDWAN, cEdge, Upgrade Software, CLI Mode,vManage,vSmart,vBond, CLI Upgrade
3:45
-
Play video MPP Phone Firmware Upgrade Using External TFTP Server
MPP Phone Firmware Upgrade Using External TFTP Server
This video demonstrates the steps to upgrade WebEx Multiplatform(MPP) Phone's firmware using external TFTP server. Tags: webex, devices
8:00
-
Play video Understanding the PnP Workflow
Understanding the PnP Workflow
This video walks through the process of onboarding a Catalyst 9K switch using the Catalyst Center Plug and Play workflow.
6:39
-
Play video Identify SNS Components for RMA
Identify SNS Components for RMA
This video shows key Cisco SNS components for RMA, including how to identify each part and its physical location, enabling efficient and accurate processing during the RMA procedure.
3:49
-
Play video 1:1 Redundancy Stack Mode for C9200/C9300 Switches
1:1 Redundancy Stack Mode for C9200/C9300 Switches
This video will help you understand the concept of 1:1 redundancy stack mode, how to configure or verify this mode, and problems that may happen if you misconfigure this feature
4:16
