How to collect all logs for EPNM
2:10
This video describes the steps to collect all logs for EPNM troubleshooting using the show tech-support file <file name> command. Tags: EPNM, logs.
Related Videos
In Service Provider
-
Play video MPLS LDP Basic Configuration on NCS 540
MPLS LDP Basic Configuration on NCS 540
This video describes the steps required to perform the basic configuration of MPLS LDP on NCS 540 (IOS XR) platforms. IS-IS protocol is used as the IGP.
4:30
-
Play video Segment Routing Initial Configuration on IOS XR
Segment Routing Initial Configuration on IOS XR
Learn how to configure and verify Segment Routing on IOS XR platforms using ISIS as the Interior Gateway Protocol in this step-by-step tutorial.
4:19
-
Play video Configure Access Lists to Troubleshoot Packet Loss
Configure Access Lists to Troubleshoot Packet Loss
Contributed by: Melissa Murguia Collaborator: Jairo Velandia This video provides steps to configure an Access Control List (ACL) to troubleshoot packet loss. Tags: ACL, SP, XR, ASR9K, Troubleshooting, Configuration guide.
4:13
-
Play video Password Recovery on IOS-XR
Password Recovery on IOS-XR
This video provides steps to perform password recovery on IOS-XR devices without the need of a reimage.
4:38
-
Play video Understand eXR tcpdump Part 1
Understand eXR tcpdump Part 1
This video guides you on how to use tcpdump on Cisco XR platforms running eXR, like asr9000 and NCS5500.
7:13
-
Play video Create a L2vpn Connection Point to Point Switch Local (IOS XR)
Create a L2vpn Connection Point to Point Switch Local (IOS XR)
Contribute by: Jairo Alberto Velandia Benito Revollo. This document describes the steps to create a Point to Point connection via L2vpn making a switch local using the main interface. Tags: IOS XR, l2vpn, swithching, traininig, configuration.
5:05
