Upgrade in Install mode via Web UI
3:38
This video shows how a Catalyst 9000 switch can be upgraded without CLI via Web UI. Tags: cat9000,upgrade
Related Videos
In Enterprise Switching
-
Play video How to Configure FED CPU Capture on C9k Switches
How to Configure FED CPU Capture on C9k Switches
Tutorial on how to configure and use FED CPU Punt and Inject capture on Catalyst 9000 series switches. Tags:C9000,C9k,Catalyst9k,packet loss,drops,packet capture,broadcast storm
4:16
-
Play video Understanding the PnP Workflow
Understanding the PnP Workflow
This video walks through the process of onboarding a Catalyst 9K switch using the Catalyst Center Plug and Play workflow.
6:39
-
Play video Enabling Layer 3 PIM Multicast on Catalyst Devices
Enabling Layer 3 PIM Multicast on Catalyst Devices
This video demonstrates how to enable Layer 3 PIM Multicast on Catalyst Devices. Tags: cat9000switch, cat8000router, multicast, pim
3:58
-
Play video 1:1 Redundancy Stack Mode for C9200/C9300 Switches
1:1 Redundancy Stack Mode for C9200/C9300 Switches
This video will help you understand the concept of 1:1 redundancy stack mode, how to configure or verify this mode, and problems that may happen if you misconfigure this feature
4:16
-
Play video Configure SPAN capture and apply traffic filters
Configure SPAN capture and apply traffic filters
This video describes the process to configure SPAN capture and apply ACL to filter specific traffic
2:39
-
Play video Convert Catalyst 9600/9600X StackWise Virtual to Quad-Supervisor
Convert Catalyst 9600/9600X StackWise Virtual to Quad-Supervisor
This video provides the procedure and a step-by-step walkthrough on how to convert an existing Catalyst 9600 or Catalyst 9600X StackWise Virtual deployment into a Quad-Supervisor setup. Tags: catalyst,9600,9600x,c9600,c9600x,c9000,svl
8:04
