Understanding the PnP Workflow
6:39
This video walks through the process of onboarding a Catalyst 9K switch using the Catalyst Center Plug and Play workflow.
Related Videos
In Enterprise Switching
-
Play video Replace a DIMM Module on Catalyst 9400 Supervisors
Replace a DIMM Module on Catalyst 9400 Supervisors
This video provides the method on how to replace the DIMM memory module on Catalyst 9400 Supervisor Modules Tags:cat9k,c9k,c9400
3:34
-
Play video Enabling Layer 3 PIM Multicast on Catalyst Devices
Enabling Layer 3 PIM Multicast on Catalyst Devices
This video demonstrates how to enable Layer 3 PIM Multicast on Catalyst Devices. Tags: cat9000switch, cat8000router, multicast, pim
3:58
-
Play video Configure SPAN capture and apply traffic filters
Configure SPAN capture and apply traffic filters
This video describes the process to configure SPAN capture and apply ACL to filter specific traffic
2:39
-
Play video 1:1 Redundancy Stack Mode for C9200/C9300 Switches
1:1 Redundancy Stack Mode for C9200/C9300 Switches
This video will help you understand the concept of 1:1 redundancy stack mode, how to configure or verify this mode, and problems that may happen if you misconfigure this feature
4:16
-
Play video Upgrade in Install mode via Web UI
Upgrade in Install mode via Web UI
This video shows how a Catalyst 9000 switch can be upgraded without CLI via Web UI. Tags: cat9000,upgrade
3:38
-
Play video Troubleshooting DHCP Relay Issues on C9000 Switches
Troubleshooting DHCP Relay Issues on C9000 Switches
This video explains how to troubleshoot common DHCP relay issues caused by CPU queue limitations. Tags: dhcp relay issues, c9000
4:22
