Upgrading a Stack of Catalyst 9200 Switches in Install Mode
5:53
This video provides the method to upgrade a Catalyst 9200 Stack in Install Mode. Tags: catalyst,upgrade,switch,install,stack
Related Videos
In Enterprise Switching
-
Play video Configure SPAN capture and apply traffic filters
Configure SPAN capture and apply traffic filters
This video describes the process to configure SPAN capture and apply ACL to filter specific traffic
2:39
-
Play video Understanding the PnP Workflow
Understanding the PnP Workflow
This video walks through the process of onboarding a Catalyst 9K switch using the Catalyst Center Plug and Play workflow.
6:39
-
Play video How to Configure FED CPU Capture on C9k Switches
How to Configure FED CPU Capture on C9k Switches
Tutorial on how to configure and use FED CPU Punt and Inject capture on Catalyst 9000 series switches. Tags:C9000,C9k,Catalyst9k,packet loss,drops,packet capture,broadcast storm
4:16
-
Play video Replace a DIMM Module on Catalyst 9400 Supervisors
Replace a DIMM Module on Catalyst 9400 Supervisors
This video provides the method on how to replace the DIMM memory module on Catalyst 9400 Supervisor Modules Tags:cat9k,c9k,c9400
3:34
-
Play video 1:1 Redundancy Stack Mode for C9200/C9300 Switches
1:1 Redundancy Stack Mode for C9200/C9300 Switches
This video will help you understand the concept of 1:1 redundancy stack mode, how to configure or verify this mode, and problems that may happen if you misconfigure this feature
4:16
-
Play video Upgrade in Install mode via Web UI
Upgrade in Install mode via Web UI
This video shows how a Catalyst 9000 switch can be upgraded without CLI via Web UI. Tags: cat9000,upgrade
3:38
