- 2x
- 1.75x
- 1.5x
- 1.25x
- 1x, selected
- 0.75x
- 0.5x
- Chapters
- descriptions off, selected
- captions settings, opens captions settings dialog
- captions off, selected
This is a modal window.
Beginning of dialog window. Escape will cancel and close the window.
End of dialog window.
This is a modal window. This modal can be closed by pressing the Escape key or activating the close button.
This is a modal window. This modal can be closed by pressing the Escape key or activating the close button.
This is a modal window. This modal can be closed by pressing the Escape key or activating the close button.
This is a modal window.
NX-OS 10.2: EVPN Hybrid IRB Mode Overview
9:35
This feature allows NX-OS VTEPs operating in Symmetric IRB mode to seamlessly inter-operate with VTEPs running in Asymmetric IRB mode within the same VXLAN EVPN fabric.
Related Videos
In Data Center Fabrics
-
Play video Floating L3Out Enhancements
Floating L3Out Enhancements
Starting from Cisco APIC Release 4.2, you could no longer specify L3Out logical interface paths for L3Out by using floating L3Out. APIC Release 5.2 enhances floating L3Out capabilities to optimize traffic path for internal endpoints to floating L3Out
8:46
-
Play video Bridging the gap with VXLAN EVPN
Bridging the gap with VXLAN EVPN
Learn and understand the benefits of choosing VXLAN EVPN as your fabric mode.
4:34
-
Play video NX-OS 10.2: Inter-VRF and Multi-site Service Chaining Overview
NX-OS 10.2: Inter-VRF and Multi-site Service Chaining Overview
Learn about ePBR enhancements on Inter-VRF service chaining and multi-site support introduced in NX-OS 10.2 and use cases now available with this new capability.
9:43
-
Play video PBR Destination in an L3Out
PBR Destination in an L3Out
Prior to APIC Release 5.2, PBR destinations must be in a BD, not in an L3Out. Starting with APIC Release 5.2, PBR destinations can be in an L3Out, which provides a more flexible design for service insertion.
7:16
-
Play video NX-OS 10.2: EVPN Distributed NAT Overview
NX-OS 10.2: EVPN Distributed NAT Overview
EVPN Distributed NAT enables Network Address Translation in a VXLAN EVPN fabric and offers enhancements like mobility and traffic engineering at host level and on border nodes for DCI (Data Center Interconnect).
9:20
-
Play video NX-OS 10.2: Multicast NAT Overview
NX-OS 10.2: Multicast NAT Overview
Learn about Multicast Service Reflection on the Nexus 9000 and how bringing this capability within the network itself will improve network performance and scale.
7:27
