How can I perform factory pre-installation of devices using SLP
1:16
Perform factory pre-installation of devices using SLP
Related Videos
In Technical Support
-
Play video Cisco Tech Talk: Configure a CBD Built-in Radius Server for a CBW Network
Cisco Tech Talk: Configure a CBD Built-in Radius Server for a CBW Network
In this edition of Cisco Tech Talk, I'll show you how to configure a built-in Cisco Business Dashboard (CBD) Radius server for use with a CBW wireless network.
5:04
-
Play video Cisco Tech Talk: Configure CBD with VMWare Part 1
Cisco Tech Talk: Configure CBD with VMWare Part 1
In this first, of a two-part edition of Cisco Tech Talk, I’ll show you how to set up Cisco Business Dashboard version 2.7 with VMware Workstation Player. https://www.vmware.com/products/workstation-player/workstation-player-evaluation.html
4:12
-
Play video Replace a DIMM Module on Cat9600 Supervisor Engine 1
Replace a DIMM Module on Cat9600 Supervisor Engine 1
This video provides the method on how to replace the DIMM memory module on a Cat9600 Supervisor Engine 1. Tags:cat9k,c9k,sup1,c9600,c9600-sup1
2:50
-
Play video Cisco Tech Talk: SNMP for Beginners: Part 1
Cisco Tech Talk: SNMP for Beginners: Part 1
In this first, of a two-part edition of Cisco Tech Talk, I’ll explain the basics of Simple Network Management Protocol (SNMP).
5:17
-
Play video Cisco Tech Talk: Configure Dying Gasp on Catalyst 1300 Switches via CLI
Cisco Tech Talk: Configure Dying Gasp on Catalyst 1300 Switches via CLI
In this edition of Cisco Tech Talk, I’ll show you how to turn on and test the dying gasp feature on a Cisco Catalyst 1300 switch using the command line interface (CLI).
3:04
-
Play video Cisco Tech Talk: Speed Tests for Beginners Part 1
Cisco Tech Talk: Speed Tests for Beginners Part 1
In this first, of a two-part edition of Cisco Tech Talk, I’ll explain speed tests and how to take one.
3:28